At Adorn we pride ourselves on offering wholesale teak wall cladding panels that are both beautiful and sustainable. Our reclaimed teak wall panels are a responsible choice for your interior or exterior design needs. Choose Adorn for your wall cladding projects and experience the beauty and durability of our Teak wood panels, WPC panels, PVC Panels, Soffit panels and PS panels.
These Recycled wall coverings from Indonesia are procured from Old teak boats, houses and recycled into wooden wall panels. Thus, each panel has its own unique history.
First, all materials are properly dried. Then all nails are removed and the wood is sawed into cubes. Next, the wooden blocks are carefully sorted according to their specific characteristics and color. After that they are put together again and glued. Then the panels are lightly sanded and coated with either a clear or dark lacquer. Finally, after a thorough inspection for quality, the processed panels are packed and prepared for shipping.
Production control:
Our entire production process is very eco-friendly. We only use recycled wood and do not cut down any trees. During our visits there we not only supervise the quality of our wall panels, but also make sure that working conditions are as good as possible. Thanks to these procedures we can provide a high quality, eco-friendly, and socially responsible product.
Installation Info
Owner / Installer’s responsibility
All of our panels are throughly inspected to ensure that you receive only the very finest specimen hardwoods nature has to bestow as all of our materials are natural however some natural variations in grading may occur. It is the installer’s responsibility to check the suitability of all panels prior to installation. In the highly unlikely event that any defects are found to the present, you should contact your supplier immediately. Do not install panels you suspect to be defective as we cannot acceptreturns once panels have been installed. It is the installer’s responsibility to ensure that the project site is suitable and that the panels are correctly installed (for which see later) The manufacturers accepts no responsibility for failure due incorrect or inappropriate installation
Project Site – Inspection
The 3d wall collection is suitable solely for indoor installation. The project site should be fully enclosed to the elements and all receiving walls should be completely dry.
The Receiving wall
Our wall paneling may be applied to a range of receiving surfaces. For the best results we recommend fixing to an even surface. Flat walls are ideal but by no means vital; a small degree of unevenness is acceptable and will not cause problems.
Condition of receiving wall – general
In general, surfaces should be clean and free from any loose material or debris. They should be completely dry and structurally capable of supporting the aggregate panel weight, together with that of any backing strata (where used). For the best result it is recommended to paint the receiving wall black before mounting.
